Tredia L4-1795cc 1.8L SOHC Turbo (1984)
Brake Master Cylinder: Technical Service Bulletins
Brakes - Push Rod Clearance Specifications
SUBJECT:
BRAKE PUSH ROD CLEARANCE SPECIFICATIONS
NO.
STB-85-05-002
DATE
August, 1985
MODEL
All Models
STB Revision
PURPOSE
STB-85-05-002
This bulletin is issued to clarify the Service Manual specifications for brake push rod clearance. The brake push rod clearance value at atmospheric
pressure is different from the clearance value when a vacuum is applied to the booster.
SERVICE MANUALS AFFECTED
All service manuals are affected. The pages affected are tabulated below. As reference to this bulletin, please write the STB number on each of the pages
affected.
Service Manual
Page Affected
(Name)
1985
1984
1983
Cordia/Tredia
5-16
5-14
5-15
Starion
5-14
5-14
5-14
Truck
5-13
N/A
N/A
Montero
5-13
5-13
5-13
Mirage
5-15
N/A
N/A
Galant
5-18
N/A
N/A
(N/A, Not Applicable)
PUSH ROD CLEARANCE MEASUREMENT
1.
Clearance with vacuum applied to the booster should be measured with the engine idling.
2.
Clearance without vacuum applied to the booster should be measured only after pumping the brake pedal several times after the engine is shut off
to bring the booster to atmospheric pressure.
FIGURE 1
