Tredia L4-1795cc 1.8L SOHC Turbo (1984)
Brake Master Cylinder: Service and Repair
1.
Disconnect harness connector of fluid lever sensor.
2.
Disconnect brake lines at master cylinder.
3.
Remove master cylinder from brake booster.
4.
Reverse procedure to install. Check clearance between primary piston and pushrod of brake booster. Clearance should be .016-.031 inch. If
clearance is not as specified, turn adjusting screw on pushrod as required. Torque attaching nuts to 6-9 ft. lbs., then bleed brake system.
