Tredia L4-1795cc 1.8L SOHC Turbo (1984)
Connecting Rod: Service and Repair
Fig. 8 Piston & rod assembly disassembly
REMOVAL
Refer to Fig. 8 when removing piston and rod assembly. Keep all components, such as connecting rod caps and bearings, in proper order for
installation.
INSTALLATION
1.
Position each piston ring gap as far apart as possible.
2.
Ensure that each piston and rod are installed in the same cylinder bore as removed.
3.
Ensure that connecting rod caps and bearings are placed on proper connecting rods, then torque bolts to specification.
