Tredia L4-1795cc 1.8L SOHC Turbo (1984)
Torsion Arm: Service and Repair
Fig. 3 Removing Suspension Assembly From Body
Removal
1.
Remove coil spring as described under ``Coil Spring, Replace.''
2.
Disconnect brake hoses at suspension arm, then remove suspension assembly from body, Fig. 18.
Disassemble
Before disassembling, place alignment marks on suspension arms and components so they can be assembled in the same position. On models
equipped with stabilizer bar, make alignment marks on stabilizer bar and stabilizer bracket.
1.
Remove nuts on both ends of suspension arm, then remove fixtures and rubber bushings.
2.
Remove dust cover clamp and slide dust cover to right, being careful not to damage it.
3.
Separate suspension arm into right and left arms.
Fig. 4 Removing Bushing "A" From Left Suspension Arm
4.
Using screwdriver, remove bushing ``A'' from left hand suspension arm, Fig. 19.