Tredia L4-1795cc 1.8L SOHC Turbo (1984)
Input Shaft: Technical Service Bulletins
M/T - KM162 & KM163 Input Shaft Locknut Torque
SUBJECT:
KM162, KM163 INPUT SHAFT LOCKNUT TIGHTNESS
NO.
STB-85-21-007
DATE December 1985
MODEL Cordia/Tredia, Mirage
STB Revision
PURPOSE
STB-85-21-007
This bulletin revises the tightening torque for the input shaft locknut in the KM162 (Mirage) and KM163 (Cordia/Tredia) 5-speed manual transaxles.
Should the nut loosen, it would allow the input shaft to move endwise enough to prevent full engagement of the gears. This could cause the 5th gear to
disengage when shifted or not engage at all. In addition to the higher tightening torque for the nut, this bulletin describes the proper method of installing
and staking the nut in place. As reference to this bulletin, please write the STB number in the revision box on the following Service Manual pages:
^
1985 Mirage ................................Page 21-54
^
1985 Cordia/Tredia ........................ Page 21-48
^
1984 Cordia/Tredia ........................ Page 21-49
^
1983 Cordia/Tredia .........................Page 21-49
FIGURE 1
FIGURE 2
