mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Timing Belt|Specifications|Page 1452 > < Timing Belt|Specifications|Page 1450
Page 2
background image

-

When any of the parts are oily, check any of the oil seals in the front case and the camshaft oil seal for oil leak.

13. Camshaft sprocket

14. Oil pump sprocket

(1) Remove the plug on the left side of the cylinder block.
(2) Keep the left silent shaft from turning by inserting a philips screwdriver 8 mm (0.31 in) diameter into the plug hole.
(3) Remove the nut.

15. Crankshaft sprocket
16. Flange
17. Tensioner "B"

18. Timing belt "B"

NOTE: As with the timing belt, mark arrows to indicate direction of travel on the outside of the belt with chalk, etc.

19. Right silent shaft sprocket
20. Spacer
21. Crankshaft sprocket "B"
22. Key
23. Timing belt under cover

INSPECTION 

Check the belt in detail. If the following flaws are evident replace belt with a new one.

(1) Hardened back surface rubber. Back surface glossy. Non-elastic and so hard that even if a finger nail is forced into it, no mark is produced.

Timing Belt|Specifications|Page 1452 > < Timing Belt|Specifications|Page 1450