200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Camshaft Position Sensor: Diagnostic Trouble Code Tests and Associated Procedures
With CONSULT
DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
1) Turn ignition switch "ON" and select "DATA MONITOR" mode with CONSULT.
2) Start engine and run it for at least 2 seconds at idle speed.
Generic Scan Tool
DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
1) Start engine and run it for at least 2 seconds at idle speed.
2) Select "MODE 3" with Generic Scan Tool (GST).
Without CONSULT
DIAGNOSTIC TROUBLE CODE CONFIRMATION PROCEDURE
1) Start engine and run it for at least 2 seconds at idle speed.
2) Turn ignition switch "OFF", wait for at least 3 seconds and then "ON".
3) Perform "Diagnostic Test Mode II" (Self-diagnostic results) with Engine Control Module (ECM).