200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Steering Gear: Service and Repair
Manual Rack & Pinion
Removal and Installation
1. Raise and support front of vehicle and remove wheels.
2. Disconnect tie rod from steering knuckle.
3. Loosen steering gear attaching bolts, then remove bolt securing lower joint to steering gear pinion and remove lower joint from pinion.
4. Remove steering gear housing to body attaching bolts, then the steering gear and linkage assembly from vehicle.
5. Reverse procedure to install
Disassembly and Assembly
Fig. 2 Rack & Pinion Manual Steering Gear
DISASSEMBLE
When disassembling manual steering gear, refer to Fig. 2.
Fig. 3 Pinion Guide Clip Installation