200SX L4-1998cc 2.0L DOHC MFI (SR20DE) (1995)
Seal ring clearance
-
Install new seal rings onto oil pump cover.
-
Measure clearance between seal ring and ring groove.
Standard clearance: 0.1 - 0.25 mm (0.0039 - 0.0098 in)
Allowable limit: 0.25 mm (0.0098 in)
-
If not within allowable limit, replace oil pump cover assembly.
ASSEMBLY
1. Install oil seal on oil pump housing.
2. Install O-ring on oil pump housing.
-
Apply ATF to O-ring.
3. Install inner and outer gears on oil pump housing.
-
Take care with the direction of the inner gear.