200SX L4-2187cc 2.2L SOHC (Z22E) (1982)
Control Assembly: Service and Repair
Fig. 1 Instrument Panel Removal
1.
Disconnect battery ground cable.
2.
Pull off control lever and fan switch knobs and remove heater control mask.
3.
Remove screws securing left and right lower dash panels and cluster lids A and B, Fig. 1, and remove panels.
4.
Disconnect control cables at heater and blower cases.
5.
Disconnect wiring harness connectors to controls.
6.
Remove screws securing control and remove control assembly.
7.
Reverse procedure to install, then adjust control cables