200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
Install cylinder head completely with intake and exhaust manifolds.
Apply engine oil to threads and seating surfaces of cylinder head bolts before installing them.
Be sure to install washers between bolts and cylinder head.
CAUTION: If cylinder head bolt exceeds limit of dimension "A", replace it.
Dimension "A": 158.2 mm (6.228 inch)
Tighten cylinder head bolts using the following procedure.
a. Tighten all bolts to 39 Nm (4.0 kg-m, 29 ft. lbs.).
b. Tighten all bolts to 78 Nm (8.0 kg-m, 58 ft. lbs.).
c. Loosen all bolts completely.
d. Tighten all bolts to 34 to 44 Nm (3.5 to 4.5 kg-m, 25 to 33 ft. lbs.).