200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
/Page-453004.png)
14.
Re-install the engine coolant reservoir tank mounting bracket. Use an appropriate torque wrench to tighten the mounting bolt to: 3.7 - 5.0 N.m
(0.38-0.51 kg-m, 33.0 - 44.3 in-lb).
15.
Re-install the engine coolant reservoir tank into its mounting bracket.
16.
Remove the floor jack from under the vehicle.
17.
Check for smooth engine idle.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Campaign Line (CM) claim using the claims coding table as shown.
