nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Throttle Position Sensor > < Diagram Information and Instructions|Page 3049

200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)

Page 1
background image

Closed Throttle Position Switch: Testing and Inspection

COMPONENT INSPECTION 
Closed Throttle Position Switch 

1. Start engine and warm it up to normal operating temperature.
2. Turn ignition switch "OFF".
3. Disconnect throttle position switch harness connector.

4. Check continuity between terminals (5) and (6) while opening throttle valve manually.

If NG, replace throttle position switch.

Throttle Position Sensor > < Diagram Information and Instructions|Page 3049