200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Rotor
Front
REMOVAL
1. Remove the drive shaft.
2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
INSTALLATION
Install the sensor rotor. Use hammer and wooden block.
-
Always replace sensor rotor with new one.
Rear
REMOVAL
1. Remove the rear wheel hub.
2. Remove the sensor rotor using suitable puller, drift and bearing replacer.
INSTALLATION
Install the sensor rotor. Use suitable drift and press.
-
Always replace sensor rotor with new one.