200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
b. Install upper separating gasket, upper inter separating gasket and upper separating plate in order shown in illustration.
-
Always use new gaskets.
c. Install reamer bolts (F) from bottom of upper body. Using reamer bolts as guides, install separating plate and gaskets as a seat.
d. Install pilot filter.
e. Place inter body as shown in the illustration. Install steel balls in their proper positions.
f.
Install inter body on upper body using reamer bolts (F) as guides.
-
Be careful not to dislocate or drop steel balls.