200SX SE-R L4-1998cc 2.0L DOHC MFI (SR20DE) (1998)
6. Draw out boot.
^
Cover drive shaft serrations with tape to prevent damage to the boot.
Wheel Side
CAUTION:
The joint on the wheel side cannot be disassembled.
1. Before separating joint assembly, put matching marks or drive shaft and joint assembly.
2. Separate joint assembly with a suitable tool.
^
Be careful not to damage threads on drive shaft.
3. Remove boot bands.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.
3. Press support bearing assembly off of drive shaft.