200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
Brake Pad: Service and Repair
Rear
WARNING: Clean brake pads with a vacuum dust collector to minimize the hazard of airborne particles or other materials.
CAUTION:
^
When cylinder body is open, do not depress brake pedal, or piston will pop out.
^
Be careful not to damage piston boot or get oil on rotor.
^
Always replace shims when replacing pads.
^
If shims are rusted or show peeling of rubber coating, replace them with new shims.
Exploded View Of Rear Disc Brake Assembly
1. Remove master cylinder reservoir cap.