200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
INSTALLATION
1. Install wheel hub bearing assembly.
2. Before tightening the wheel bearing lock nut, apply oil to the threaded portion of rear spindle and both sides of plain washer. Torque nut to 187 -
255 Nm (137 - 188 ft. lbs.).
3. Check that wheel hub bearing operates smoothly.
4. Check wheel hub bearing axial end play. Axial end play: 0.05 mm (0.0020 inch) or less.