200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
2. Stand transmission case.
3. Install piston assembly on transmission case while turning it slowly.
-
Apply ATF to inner surface of transmission case.
4. Install return springs and spring retainer on piston.
5. Install snap ring while compressing return springs.
-
Set Tool directly above return springs.
6. Install drive plates, driven plates, retaining plates and dished plates.
-
Do not align the projections on the two dished plates.
-
Make sure to put the plates in the correct order and direction.