200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
c. Install reamer bolts (F) from bottom of upper body. Using reamer bolts as guides, install separating plate and gaskets as a set.
d. Place lower body side of inter body face up. Install steel balls in their proper positions.
e. Install inter body on upper body using reamer bolts (F) as guides. Be careful not to dislocate or drop steel balls.
f.
Install steel balls and relief valve springs in their proper positions in lower body.
g. Install lower separating gasket, inter separating gasket and lower separating plate in order shown in illustration.