200SX SE L4-1597cc 1.6L DOHC MFI (GA16DE) (1997)
h. Install bolts (E) from bottom of lower body. Using bolts (E) as guides, install separating plate and gaskets as a set.
i.
Temporarily install support plates on lower body.
j.
Install lower body on inter body using reamer bolts (F) as guides and tighten reamer bolts (F) slightly.
2. Install O-rings to overdrive cancel solenoid valve, torque converter clutch solenoid valve and harness connector. Apply ATF to O-rings.