240SX L4-2.4L (KA24DE) (1993)
Alignment: Service and Repair
Caster and Camber
Front Wheel
Camber cannot be adjusted. If camber is not within specifications, inspect suspension and sheet metal for damage, distortion and excessive wear.
Repair or replace components as necessary.
Rear Wheel
Fig. 3 Rear Toe-in Adjustment. Less Four Wheel Steering
1. Measure camber for each wheel following equpment manufacturer's instructions.
2. Scribe matching mark between cam and upper rear link, then loosen nut securing link bushing bolt.
3. Rotate cam bolt, Fig. 1, to bring camber within specifications. Each graduation represents 4° camber change.
4. When camber is within specifications, hold position of cam bolt and torque nut to 51-65 ft. lbs.
5. Ensure camber is still within specifications.