240SX L4-2389cc 2.4L SOHC MFI (KA24E) (1989)
Wiper Switch: Service and Repair
Front
1.
Disable airbag as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.
2.
Remove steering column covers.
3.
Disconnect windshield wiper electrical connections then remove switch retaining screws and the windshield wiper switch. It is not necessary to
remove combination switch base to replace wiper switch.
4.
Reverse procedure to install, then rearm airbag as described under MAINTENANCE PROCEDURES/AIRBAG ARMING & DISARMING.