240SX Coupe L4-2.4L (KA24DE) (1997)
1. Set shock absorber on vise with attachment, then loosen piston rod lock nut.
WARNING: DO NOT REMOVE PISTON ROD LOCK NUT AT THIS TIME.
2. Compress spring with Tool so that the shock absorber mounting bracket can be turned by hand.
3. Remove piston rod lock nut.
INSPECTION
Shock Absorber Assembly
^
Check for smooth operation through a full stroke, both compression and extension.
^
Check for oil leakage on welded or gland packing portion.
^
Check piston rod for cracks, deformation or other damage. Replace if necessary.
Upper Rubber Seat And Bushing
^
Check rubber parts for deterioration or cracks.
^
Replace if necessary.
Coil Spring
^
Check for cracks, deformation or other damage. Replace if necessary.
ASSEMBLY
^
When installing coil spring on shock absorber, it must be positioned as shown in figure.