300ZX V6-2960cc 3.0L SOHC MFI (VG30E) (1988)
Wheel Bearing: Service and Repair
Fig. 21 Exploded view of wheel hub assembly. 300ZX
Removal
1.
Block rear wheels, then raise and support vehicle.
2.
Remove wheel and tire assembly.
3.
Remove caliper.
4.
Remove wheel hub, rotor and wheel bearing from spindle, Fig. 21.
5.
Using a suitable tool, remove bearing outer race, if necessary, from hub assembly.
Inspection
Inspect all removed components for excessive wear and/or damage. Replace all worn and/or damaged components as required. Lubricate all
components using suitable grease.
Installation
Reverse removal procedure to install.