Nissan and Datsun Workshop Service and Repair Manuals

(see illustration).

Clearance "A":

M/T 0.08 +/- 0.07mm

(0.0315 +/- 0.0028 in.)

A/T 1.07 +/- 0.07mm

(0.0421 +/- 0.0028 in.)
E.

Remove blind plug and reinstall the vacuum hose removed in Step A.

17.

If applicable remove old carburetor insulator and install new countermeasure insulator.

18.

Reinstall carburetor and connect fuel hoses, vacuum hoses, throttle cable, and carburetor wiring harness.

II. Exhaust Manifold Cover Installation

(If chart 1 indicates that the exhaust manifold cover should be applied proceed with step 19. If not go to step 29.)