370Z V6-3.7L (VQ37VHR) (2010)
REAR TRIM
GUARD FRAME PLATE ASSEMBLY : Removal and Installation
CAUTION:
Replace guard frame plate assembly with a new part after removal as it cannot be reused.
REMOVAL
1. Stop storage lid assembly as shown in the figure. (during open operation).
CAUTION:
Storage lid assembly may close due to low oil pressure.
Always support storage lid assembly in the fully open position.
2. Disengage guard frame protector assembly (1) fixing pawls with a remover tool (A).
Broken triangle indicates: Pawl
3. Remove guard frame protector assembly.
4. Remove guard frame plate assembly mounting bolts (A).
5. Remove guard frame plate assembly.
INSTALLATION
Install in the reverse order of removal.
Exploded View
REAR TRIM