nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Campaign P0337 - Navigation Software Updates|Page 15 > < Entertainment System Control Module|Testing and Inspection
Page 1
background image

Technical Service Bulletin # 10-068B

Date: 110323

Campaign P0337 - Navigation Software Updates

Reference: NTB10-068B

Date: March 23, 2011

VOLUNTARY SERVICE CAMPAIGN
NISSAN NAVIGATION SOFTWARE UPDATE

This bulletin has been amended. Reference to NTB10-125 was added and shown with a "Updated in bold". Please discard previous version of this
bulletin.

CAMPAIGN ID#: P0337

APPLIED VEHICLES:
2010 Altima (L32, CL32, and L32HV) Sedan, Coupe, and Hybrid 
2010 Maxima (A35)
2010 370Z (Z34 and HZ34) Coupe and Roadster
2011 GT-R(R35)

Check Service COMM to confirm campaign eligibility.

INTRODUCTION

On the Applied Vehicles listed above, the navigation, mobile phone, and iPod(R) functions may not be working as intended. To remedy this potential
condition, Nissan is conducting this voluntary service campaign to update the navigation software at no charge for parts or labor.

IDENTIFICATION NUMBER

Nissan has assigned identification number P0337 to this campaign. This number must appear on all communications and documentation of any nature
dealing with this campaign.

DEALER RESPONSIBILITY

Dealers are to repair vehicles falling within range of this campaign that enter the service department. This includes vehicles purchased from private
parties, vehicles presented by transient (tourists) owners, and vehicles in a dealer's inventory.

REPROGRAMMING SOFTWARE DVDs - REQUIRED FOR THIS PROCEDURE

Three disc set for all applied models except GT-R

^ Each dealer has been mailed one disc set, free of charge, from Clarion.

^ Should you require additional DVDs due to loss or damage, the DVDs can be ordered, free of charge, by contacting Clarion. You should request

reference number DVD ITB10-031 INTB10-068.

Campaign P0337 - Navigation Software Updates|Page 15 > < Entertainment System Control Module|Testing and Inspection