810 Maxima L6-2793cc 2.8L DSL SOHC (LD28) (1982)
/Page-167001.png)
Engine Oil: All Technical Service Bulletins
Engine Oil - Production Oil Viscosity
Models
All Models
Section
General Information
Classification
GI86-006
Bulletin No.
TS86-016
Date
February 17, 1986
FACTORY FILL ENGINE OIL, ALL MODELS
SERVICE INFORMATION
The factory fill engine oil for all Nissan models has an SAE viscosity number of approximately 7.5W-30, which is acceptable for all temperature ranges.
Therefore, it is not necessary to change the engine oil on new models to compensate for the outside temperature in your area. However, when changing
the oil at scheduled maintenance intervals, use the appropriate viscosity motor oil for the anticipated temperature range from the chart below.
