810 Maxima L6-2793cc 2.8L DSL SOHC (LD28) (1982)
Exhaust Manifold: Technical Service Bulletins
Exhaust Manifold Nut - Design/Part Number Change
TS82-030
April 21, 1982
Engine Control Fuel & Exhaust System
EXHAUST MANIFOLD NUT
Applied Model:
280ZX, 810 Maxima,720
Production Change:
The exhaust manifold nut has been changed on the production line, beginning with February production, as shown in the illustration.
Parts Information:
New
Former
Tightening Torque
Application
Size
20602-P6700 20602-F1700
27-34 ft-lbs.
910 L24E, LD28
10mm
720 Z22, 280ZX L28E
20602-S3000 20602-SO600
22-26 ft-lbs.
720 SD22
8mm
NOTE:
Part Number 20602-S3000 can be applied to 210 and 310. However, this nut will not be changed on the production line of these models.