810 Maxima L6-2793cc 2.8L DSL SOHC (LD28) (1982)
10.
Remove rear housing cover using Kent-Moore Special Service Tool J28819 (Figure 6).
11.
Scribe match marks on rear housing and pinion housing (Figure 7).
12.
Loosen retainer adjusting screw locknut (Figure 8) and remove adjusting screw, spring, retainer and holder (Figure 9). This releases side load on
rack.
13.
Remove four torx bolts holding rear housing to pinion housing using an 8mm socket. Carefully twist off rear housing (Figure 10). There will