Altima L4-2.4L (KA24DE) (1994)
A direction mark is shown to clarify the side of connector (terminal side or harness side).
Direction marks are mainly used in the illustrations indicating terminal inspection.
Flow Chart Example
How To Follow Flow Chart In Trouble Diagnoses
The flow chart indicates work procedures required to diagnose problems effectively. Observe the following instructions before diagnosing.
1. Use the flow chart after locating probable causes of a problem following the "Preliminary Check" or the "Symptom Chart".
2. After repairs, re-check that the problem has been completely eliminated.
3. Check the Component Parts Location and Harness Layout for the Systems described in each section for identification/location of components and
harness connectors.