Altima L4-2.5L (QR25DE) (2009)
-
Apply Genuine Silicone RTV Sealant or equivalent to the upper oil pan at the specified sealant bead diameter (A) as shown. Refer to See:
Specifications/Fluid Type Specifications.
Sealant bead diameter (A) : 4.0 - 5.0 mm (0.157 - 0.197 in)
CAUTION:
Install two new O-rings in the upper oil pan.
-
Tighten the upper oil pan bolts in the order as shown.
-
Apply Genuine Silicone RTV Sealant or equivalent to the lower oil pan at the specified sealant bead diameter (A) as shown. Refer to See:
Specifications/Fluid Type Specifications.
Sealant bead diameter (A) : 4.0 - 5.0 mm (0.157 - 0.197 in)
-
Tighten the lower oil pan bolts in the numerical order shown.
CAUTION:
Wait at least 30 minutes after the oil pans are installed before filling the engine with oil.
Inspection AFTER INSTALLATION