Altima L4-2.5L (QR25DE) (2009)
Parking Assist Control Module: Service and Repair
Removal And Installation - Coupe
CAMERA CONTROL UNIT
Removal and Installation - Coupe
REMOVAL
1. Disconnect the negative battery terminal.
2. Remove the trunk floor carpet and spare tire cover. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate
Interior Trim Panel/Service and Repair/Removal And Installation/Coupe.
3. Remove the LH trunk side finisher. Refer to See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Interior Trim
Panel/Service and Repair/Removal And Installation/Coupe.
4. Remove the LH trunk floor spacer.
5. Disconnect the rear view camera control unit connector (A), then remove the rear view camera control unit screws (B) and remove the rear view
camera control unit (1).
INSTALLATION
Installation is in the reverse order of removal.