Altima L4-2.5L (QR25DE) (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
TIRE PRESSURE RECEIVER
Removal and Installation
REMOVAL
1. Remove instrument lower cover (LH). Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Exploded View.
2. Locate tire pressure receiver (1) to the right of the steering column (2) and disconnect tire pressure receiver electrical connector.
Arrow indicates Front
3. Remove tire pressure receiver (1) from bracket using a suitable tool to release the bracket.
INSTALLATION
Installation is in the reverse order of removal.