Altima L4-2.5L (QR25DE) Hybrid (2007)
Fog/Driving Lamp Bulb: Service and Repair
FRONT FOG LAMP
Bulb Replacement
REMOVAL
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb.
CAUTION:
-
Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is
lit or right after being turned off. Burning may result.
-
Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp.
When replacing bulb, be sure to replace it with new one.
1. Position the front fender protector aside.
2. Disconnect the fog lamp electrical connector.
3. Turn the fog lamp bulb (B) counterclockwise to remove it.
-
Fog lamp assembly (1)
-
Fog lamp bolt (A)