Altima L4-2.5L (QR25DE) Hybrid (2007)
NOTE:
The drawing above is for reference to location of measurement only.
6. For rear center cross member:
a. On the left side template, cut out a hole where noted for the existing 20 mm (25/32 inches) hole, and then place it where shown in Figure 4.
b. Measure 295 mm (11-19/32 inches) from the existing 20 mm hole's vertical center line to the vertical center line of the right side template, and then
put it in place (see Figure 4).
7. For rear of right side member: