Altima L4-2.5L (QR25DE) Hybrid (2007)
Figure 1
B. Go to C.
C. Compare the Part Number you wrote down to the numbers in the Current ECM Part Number column in Table A.
-
If there is a match, this section applies. Continue with the reprogramming procedure.
-
If there is not a match, ECM reprogramming does not apply. If the A/F Sensor was replaced in the SERVICE PROCEDURE FOR A/F
SENSOR section of this bulletin, proceed to Step 4. If the A/F Sensor was not replaced close C-III and refer to ASIST for further
diagnostic information.
3. If this section applies and you have performed ECM reprogramming, when complete the screen in Figure 2 appears.