Altima L4-2.5L (QR25DE) Hybrid (2007)
Engine Control Module: Customer Interest
Engine Controls - MIL ON/DTC P0448 Set
Classification: EC11-011
Reference: NTB11-031
Date: March 24, 2011
2007-2011 ALTIMA HYBRID; MIL 'ON' WITH DTC P0448
APPLIED VEHICLES: 2007- 2011 Altima Hybrid (L32H)
IF YOU CONFIRM
DTC P0448 is the only code stored in the ECM.
AND
The vehicle is equipped with a Vent Control Valve Filter (see Figure below, shown with Right Rear Wheel removed).
NOTE:
If the vehicle is not equipped with a Vent Control Valve Filter then NIB10-057 may also apply.
ACTIONS
1. Refer to Step 2 in the Service Procedure to confirm this bulletin applies to the vehicle you are working on.
2. If this bulletin applies, reprogram the ECM.
IMPORTANT:
The purpose of ACTIONS (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.
CLAIMS INFORMATION