Altima L4-2.5L (QR25DE) Hybrid (2007)
^
Install slit part (A) of lower shaft assembly joint aligning with the marking position (B) of steering gear assembly input shaft. Make sure that
the slit part of lower joint (A) is aligned with the marking position (B) of gear housing assembly input shaft.
^
Perform final tightening of nuts and bolts on each part under unladen conditions with tires on level ground when removing steering gear assembly
Check wheel alignment.
INSPECTION AFTER INSTALLATION
Make sure that steering wheel operates smoothly by turning several times from full left stop to full right stop.