Altima L4-2.5L (QR25DE) Hybrid (2007)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION (PNP) SWITCH
Exploded View TM-31
Removal and Installation
CAUTION:
When replacing the PNP switch, replace the manual lever with new one or transfer the manual lever (1) from the old PNP switch to the new
PNP switch. The manual lever must have a rectangular hole as shown for proper operation of the transaxle.
REMOVAL
1. Remove the nut and shift cable from the manual lever.
2. Disconnect the connector from the PNP switch.
3. Remove the PNP switch bolts (A) and the PNP switch.