Altima V6-3.5L (VQ35) (2003)
3. Remove front oil seal from front cover.
CAUTION: Be careful not to damage front cover or crankshaft.
INSTALLATION
1. Apply new engine oil to new oil seal and install it flush with front of mounting surface using a suitable tool.
^
Install new oil seal in the direction shown.
Suitable drift
Outer diameter: 59 mm (2.32 inch)
Inner diameter: 49 mm (1.93 inch)
CAUTION: Press fit straight and avoid causing burrs or tilting the oil seal.
2. Installation of the remaining components is in reverse order of removal.