Altima V6-3.5L (VQ35) (2003)
/Page-542004.png)
c. Position a pulley puller at recess hole of crankshaft pulley to remove crankshaft pulley.
CAUTION: Do not use a puller claw on crankshaft pulley periphery.
26. Remove the front timing chain case.
a. Loosen the bolts in the numerical order as shown.
b. Insert the appropriate size tool into the notch (1) at the top of the front timing chain case as shown.
c. Pry off the case by moving the suitable tool (2) as shown.
^
Use seal cutter or an equivalent tool to cut liquid gasket for removal.
CAUTION:
^
Do not use a screwdriver or similar tool.
^
After removal, handle carefully so it does not bend, or warp under a load.
27. Disconnect the power brake booster vacuum hose.
28. Disconnect the electric throttle control actuator.
29. Disconnect the coolant hoses at the electric throttle control actuator.
30. Disconnect the PCV hose.
31. Disconnect the EVAP canister purge volume control solenoid vacuum hose.
32. Remove the intake manifold collector. Loosen the bolts and nuts in the numerical order as shown.
