Altima V6-3.5L (VQ35) (2003)
/Page-542008.png)
44. Remove the chain tension guide.
45. Remove the rear timing chain case.
CAUTION:
^
Do not remove the plate metal cover for the oil passage.
^
After removing the chain case, do not apply any load to the case that might bend it.
a. Loosen and remove the rear timing chain case bolts in the order shown.
b. Cut the sealant with an appropriate tool and remove the rear timing chain case.
46. Remove O-rings to cylinder head and cylinder block.
47. Use a scraper to remove all of the old Silicone RTV Sealant from the front and rear timing chain case and opposite mating surfaces.
CAUTION: Do not damage the mating surfaces.
48. Remove all old Silicone RTV Sealant from all the bolt holes and bolts.
CAUTION: Do not damage the threads or mating surfaces.
