Altima V6-3.5L (VQ35) (2003)
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
SERVICE PROCEDURE
NOTE:
After completing repairs in this procedure, make sure any stored DTCs are erased.
1.
Make sure there are no engine vacuum leaks. Repair any vacuum leaks that are found. Make sure to check:
^
Hoses
^
Intake Manifold
^
Ducting between Intake Manifold and MAFS
2.
Perform Idle Air Volume Learning (IAVL) procedure as follows.
NOTE:
The IAVL procedure will normally complete within 2 minutes after Procedure Start.
A.
Make sure all DTCs are cleared (erased).
B.
Use CONSULT-II to confirm / perform the following Pre-Conditions: