Altima V6-3.5L (VQ35) (2003)
/Page-1758002.png)
^
Check for smooth operation through a full stroke, both compression and extension.
^
Check for oil leakage on welded or gland packing portions.
^
Check piston rod for cracks, deformation or other damage and replace if necessary.
MOUNTING INSULATOR AND RUBBER PARTS
^
Check cemented rubber-to-metal portion for separation or cracks. Check rubber parts for deterioration and replace if necessary.
THRUST BEARING
^
Check thrust bearing parts for abnormal noise or excessive rattle in axial direction and replace if necessary.
COIL SPRING
^
Check for cracks, deformation or other damage and replace if necessary.
Assembly
^
When installing coil spring on strut, it must be positioned as shown.
^
Install upper spring seat with alignment mark facing the outer side of vehicle, in line with strut-to-knuckle attachment points.
^
Replace strut lower mounting nuts.
^
When installing strut to knuckle, be sure to hold bolts and tighten nuts.
: 125 - 155 Nm (13.0 - 16.0 kgf-cm, 93 - 114 ft. lbs.)
