Altima V6-3.5L (VQ35) (2003)
1. Remove valves at retainer plates.
-
Do not use a magnetic pick-up tool.
a. Use a screwdriver to remove retainer plates.
b. Remove retainer plates while holding spring, plugs or sleeves.
^
Remove plugs slowly to prevent internal parts from jumping out.
c. Place mating surface of valve body face down, and remove internal parts.
^
If a valve is hard to remove, place valve body face down and lightly tap it with a soft hammer.
^
Be careful not to drop or damage valves and sleeves.
INSPECTION
Valve Spring