Altima V6-3.5L (VQ35) (2003)
Wiring Harness: All Technical Service Bulletins
A/T - Harsh 1-2 Shift/DTC P0745 Stored
Classification:
AT04-014
Reference:
NTB05-001
Date:
January 3, 2005
4 SPEED AUTOMATIC TRANSMISSION HARSH 1-2 SHIFT AND/OR DTC P0745 STORED
APPLIED VEHICLES:
2003 - 2005 Altima (L31)
2003 - 2005 Sentra
2003 - 2004 Maxima (A33 and A34)
2004 Quest (V42)
APPLIED DATES: Vehicles built between:
December 1, 2002 and August 27, 2004
APPLIED TRANSMISSIONS:
4 speed A/T: RE4F04B and RE4F03B
IF YOU CONFIRM:
The transmission fluid is full (correct level) and in good condition (not burnt), and
^
There is a harsh shift from 1st to 2nd gear, and/or
^
DTC P0745 (line pressure solenoid circuit) is stored,
ACTIONS:
1.
Drain and remove the transmission oil pan.
2.
Push/pull the ground terminal and wire for the solenoid valve assembly (see Service Procedure step 4).
^
If it doesn't come off, solder the terminal.
^
If it does come off, replace the solenoid assembly.
3.
After soldering, recheck the ground terminal and wire (see Service Procedure step 8).
^
If it's tight, repair is complete.
^
If it's loose, replace the solenoid assembly.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.