nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Gear Sensor/Switch, M/T > < Replacing Fluid
Page 1
background image

Fluid - M/T: Service and Repair
Checking Fluid

Checking 

OIL LEAKAGE AND OIL LEVEL 
^

Check that oil is not leaking from transaxle.

^

Check oil level from filler plug mounting hole as shown. 

CAUTION:  Never start engine while checking oil level.

^

Set a new gasket on the filler plug and install it on the transaxle.
Filler plug : 30 - 39 Nm (3.1 - 4.0 kg-m, 23 - 28 ft. lbs.)  

CAUTION:  Do not reuse gasket.

Gear Sensor/Switch, M/T > < Replacing Fluid