Altima 2.5 L4-2.5L (QR25DE) (2002)
Submit a Primary Failed Part (PP) line claim using the claims coding shown.
SERVICE PROCEDURE INTRODUCTION
^
The door "waist molding" has nine metal tabs along its length. These tabs go through slots in the plastic finisher (see Figure 2A).
^
The tabs fold under to attach the waist molding to the door finisher fabric. Finisher Fabric "Pulls Away":
^
If the metal tab closest to the back of the door unfolds (see Figures 2A and 2B), the waist molding can come loose from the finisher.